FuzeTi FDC 3D Printed Enclosure

Timecode Generator

The FUZE timecode generator uses a temperature compensated oscillator. The clock has a tolerance of +/-1ppm, capable of achieving an accuracy of less than one frame drift over a 24 hour period. Operating at temperatures from -10 to 60°C while maintaining a stability of +/-1ppm. Right on par with Ambient and Denecke devices. The projected 10-year tolerance of our clock is +/-3.5ppm, a mass improvement over the typical +/-10ppm temperature-compensated quartz crystal over 10 years.

Features:

1/4" TRS Input/Output
Standard 5-pin Lemo Input/Output 
 •Button to view last clapped time
 •Easy access brightness knob
Uses four "AA" Batteries
Easy navigation button to setup time and user data
USB allows for potential firmware updates 
 •External DC power accepts 5-16V
 •Power and low battery indicator
Weatherproof (IP55) comes as standard*

 Water Test

What's Included:

  • 1 x Timecode Generator Display
  • 5-Pin I/O Plug
  • 1/4" Neutrik Plug
  • Anti-Glare display protector (preinstalled) 

Due to the nature of 3D printing process the finish on the encolsure varies print to print. There will be cosmetic differences from pictures above. 

*To obtain full seal we highly recommend you use a screw driver to tighten the battery compartment thumb screws.

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

FuzeTi FDC 3D Printed Enclosure

  • Views: 1293
  • Brand: FuzeTi
  • Product Code: FuzeTi FDC 3D Printed Enclosure
  • Availability: In Stock
  • 785.29€
  • Ex Tax: 649.00€

Tags: FUZETi, clock, timecode generator,